Agilent Technologies E5071C User Manual

Measurement
85
Start
on the currently active trace.
Marker ->
Stop
Sets the highest value to the stimulus value of the active marker
on the currently active trace.
Marker ->
Center
Sets the center value to the stimulus value of the active marker
on the currently active trace.
• If the reference marker is on and the stimulus value of the
active marker is expressed by a value relative to the reference
marker, the absolute stimulus value will be used to set the new
sweep rang.

Agilent Technologies E5071C Specifications

General

Brand	Agilent Technologies
Model	E5071C
Category	Measuring Instruments
Language	English