E5071C
1152
measurement cycle finishes
and returns "fail" as the
ripple test result for trace 12.
13 Trace 13 Ripple Test Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the
ripple test result for trace 13.
14 Trace 14 Ripple Test Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the
ripple test result for trace 14.
15 Not used Always 0
Issuing the *CLS command will clear all the bits in the questionable ripple
limit channel {1-16} status event register.
To Next Page
Loading...
