Agilent Technologies E5071C

E5071C
1154
0 Not used Always 0
1
Trace 15
Ripple Test
Fail
Set to "0" when a measurement cycle
begins;
set to "1" when the measurement cycle
finishes and returns "fail" as the ripple test
result for trace 15.
2
Trace 16
Ripple Test
Fail
Set to "0" when a measurement cycle
begins;
set to "1" when the measurement cycle
finishes and returns "fail" as the ripple test
result for trace 16.
3-15 Not used Always 0
Issuing the *CLS command will clear all the bits in the questionable ripple
limit channel {1-16} extra status event register.