ii
Notice
The information contained in this document is subject to change without
notice.
Agilent Technologies makes no warranty of any kind with regard to this
material, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Agilent Technologies
Inc. shall not be liable for errors contained herein or for any direct, indirect,
special, incidental, or consequential damages in connection with the
furnishing, performance, or use of this material.
This document contains information which is protected by copyright. No
part of this manual may be reproduced in any form or by any means
(including electronic storage and retrieval or translation into another
language) without prior agreement and written consent from Agilent
Technologies Inc., as governed by United States and international copyright
laws.
U.S. Government Restricted Rights
The Software and Documentation have been developed entirely at private
expense. They are delivered and licensed as “Commercial computer
software” as defined in DFAR 252.227-7014 (June 1995), as a “commercial
item” as defined in FAR 2.101(a), or as “Restricted computer software” as
defined in FAR 52.227-19 (June 1987) (or any equivalent agency regulation
or contract clause), whichever is applicable. Use, duplication, or disclosure
of Software is subject to Agilent Technologies’ standard commercial license
terms, and non-DOD Departments and Agencies of the U.S. Government
will receive no greater than Restricted Rights as defined in FAR 52.227-
19(c)(1-2) (June 1987). U.S. Government users will receive no greater than
Limited Rights as defined in FAR 52.227-14 (June 1987) or DFAR 252.227-
7015(b)(2) (November 1995), as applicable in any technical data.
Copyright 2000 Agilent Technologies Inc. All rights reserved.
To Next Page
Loading...
Need help?
General
