340 Chapter 9
Test Sequencing
Creating a Test Execution Order
Figure 9-3. A Simple Sequencer Example
The braces indicate a Record data type. The Sequencer outputs a Record
of Records
, as shown in the AlphaNumeric display. This means you
could put the sequencer in a loop and run the same sequence of tests several
times yielding an array of
Records of Records.
Accessing Logged Test Data
The Sequencer outputs a Record of Records. Each test uses the test
name as its field name in the
Sequencer record. The fields within each test
are named according to the logging configuration. Using the default
configuration with the fields
Name, Result, and Pass, you could access the
result in
test1 with the notation Log.Test1.Result, as shown in Figure
9-4.
To Next Page
Loading...
Need help?
General
