Agilent Technologies VEE Pro

306 Chapter 8
Using Agilent VEE Functions
Using Functions
Figure 8-7. The Generate Menu in a UserFunction
3. Place the object in Main. Notice that VEE automatically names the new
object
ArrayStats(A) and includes the expression ArrayStats(A) to
call the
UserFunction ArrayStats.
4. Connect the output from the
Formula object to ArrayStats(A), and
connect the output from
ArrayStats(A) to Record.
5. Run the program. It should look like Figure 8-8.
Open a
UserFunction object menu and select the Generate menu to
review the other objects that can be placed into a program to call a
UserFunction. They include Call, Formula Call (used in this
example),
If/Then/Else Call, ShowPanel, and HidePanel objects.