454 Chapter 12
Platform Specifics and Web Monitoring
Web Monitoring with Agilent VEE
How a Remote User Accesses Agilent VEE on Your
System
To access VEE files on your system from another location, the remote user
needs to follow these general steps:
1. The remote user’s system must be connected to a network.
2. The remote user must be running a network browser, such as Netscape or
Internet Explorer.
3. The remote user must enter a URL address for your system. (You provide
the address to the remote user, which is explained in more detail below.)
Note The remote user does not have to be running VEE or even have VEE
installed in order to access VEE programs on your system.
The remote user connects to the network and runs the browser, and enters a
URL. You will tell the remote user the URL to enter based on the following
information. The formats you can have the remote user enter are as follows:
http://hostname {:port}
Displays your VEE Web Server Home Page, where the remote user can
enter choices about how to view your VEE program.
To Next Page
Loading...
Need help?
General
