Chapter 12 459
Platform Specifics and Web Monitoring
Web Monitoring with Agilent VEE
Lab 12-1: Practice Session with Agilent VEE Web
Browser
This exercise simulates a Web session where you provide the
Solitaire.vee program for a remote user to view on your system. In this
case, there is an error in the program and the remote user is consulting with
you on how to resolve the error.
1. Start VEE. Select
File ⇒ Default Preferences ⇒ Web Server
dialog box and click on
Enable Server. Use the default settings. Open
the
Solitaire.vee program that you want the remote user to view.
Run your network browser.
2. Contact the remote user and let him or her know to enter
http://Server5 to reach your system over the Web. (You would use
your computer name instead of
http://Server5.)
3. When the remote user enters the URL
http://Server5, the remote
user sees your VEE Web Server Home Page displayed in his or her
browser. (To review what the display looks like, refer to Figure 12-7 on
page 458.)
4. The remote user decides to view the entire VEE program first. In the
VEE Web Server Home Page, he or she clicks
Main Detail ⇒ View.
The browser displays the view shown in Figure 12-8.
To Next Page
Loading...
Need help?
General
