Chapter 1 43
Using the Agilent VEE Development Environment
Working with Objects
Moving the Entire Work Area
1. (Make sure there is at least one icon in the work area.) Place the mouse
pointer anywhere on the background of the work area, press and hold the
left mouse button, and move the work area in any direction.
Note Scroll bars appear if your program is larger than the work area, as shown in
Figure 1-16.
Note If you click near a terminal, a line or “wire” may appear. If this happens,
move the pointer to an open area and double-click.
Figure 1-16. Scroll Bars in Work Area
Vertical
Scroll Bar
Horizontal Scroll Bar
To Next Page
Loading...