Chapter 1 61
Using the Agilent VEE Development Environment
Connecting Objects to Make a Program
Note If you are using the evaluation kit software, VEE will only let you save
programs to one file,
EVAL.VEE, so just write over this file for the different
examples.
For the HP-UX version of the
Save File dialog box, see Figure 1-33.
Save as type VEE programs are normally saved with the
.vee
extension, but you can change the file type if you
wish. If you type a file name without the extension,
the
.vee is automatically added.
Save colors and
fonts with
program
(Optional) If you have changed program colors and
fonts, using the
Default Preferences menu,
and you want others who load the program to get the
colors and fonts you selected (rather than their
defaults), click to check this item.
When checked, VEE saves the changes you have
made to the default configuration as part of the
program.
Save I/O
configuration
with program
(Optional) If you have configured an instrument in
the
Instrument Manager, and you want others
who load the program to get the instruments you
configured rather than their defaults, it is
recommended that you check this item.
When checked, VEE saves the I/O configuration as
part of the program.
To Next Page
Loading...