Cisco Catalyst 4500 Series Command Reference Guide

2-944
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show tech-support
• show interfaces
• show controllers
• show process memory
• show process cpu
• show buffers
• show logging
• show module
• show power
• show environment
• show interfaces switchport
• show interfaces trunk
• show vlan
If you enter the ipmulticast keyword, the output displays the equivalent of these show commands:
• show ip pim interface
• show ip pim interface count
• show ip pim neighbor
• show ip pim rp
• show ip igmp groups
• show ip igmp interface
• show ip mroute count
• show ip mroute
• show ip mcache
• show ip dvmrp route
Examples For a sample display of the show tech-support command output, see the commands listed in the “Usage
Guidelines” section for more information.
Related Commands See the “Usage Guidelines ” section.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E