Cisco Catalyst 4500 Series Command Reference Guide

2-590
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
remote-span
remote-span
To convert a VLAN into an RSPAN VLAN, use the remote-span command. To convert an RSPAN
VLAN to a VLAN, use the no form of this command.
remote-span
no remote-span
Syntax Description This command has no arguments or keywords.
Defaults RSPAN is disabled.
Command Modes VLAN configuration mode
Command History
Examples This example shows how to convert a VLAN into an RSPAN VLAN:
Switch# config terminal
Switch(config)# vlan 20
Switch(config-vlan)# remote-span
Switch(config-vlan)# end
Switch#
Related Commands
Release Modification
12.1(20)EW Support for this command was introduced on the Catalyst 4500 series switch.
Command Description
monitor session Enables the SPAN sessions on interfaces or VLANs.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E