Cisco Catalyst 4500 Series Command Reference Guide

2-812
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show license
show license
To display information about the software license, use the show license command.
.show license [agent [counters | session] [all | detail [feature-name] | feature | file | statistics |
status | udi | right-to-use | summary | permanent | in-use | image levels | evaluation | expiring]
Syntax Description
Defaults License-related information is not displayed
Command Modes Privileged EXEC mode
Command History
Usage Guidelines Use this command to display license information and to help with troubleshooting issues related to Cisco
IOS software licenses. It displays all the licenses in the system.
This command also displays those features that are available but not licensed to execute (i.e., multiple
license can be active but not in use (execute) simulteously). Only one type license can be used at a given
time. Output is grouped according to how the features are stored in license storage (i.e., .where license
information is stored on the device).
agent Shows information about the software license agent.
all Shows information about all licenses in the system.
detail feature-name Shows detailed information about a specified licensed feature or about all
licenses.
feature Shows a list of licensed features available in an image
file Shows license entries stored in the license file.
statistics Shows license statistics information.
status Shows information about supported license types and license operations,
and provides device status.
udi Shows all the unique device identifier (UDI) values that can be licensed in
a system
right-to-use Shows all PRTU licenses.
summary Shows a brief summary of all licenses.
permanent Show all available permanent licenses
in-use Show all available in-use licenses
image levels Shows license image levels
evaluation Shows all evaluation licenses.
expiring Shows all available expiring licenses.
Release Modification
IOS XE 3.1.0 Support for show license introduced on the Catalyst 4500 Series Switches.
IOS XE 3.4.2 Keyword right-to-use introduced on the Catalyst 4500 Series Switches

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E