2-190
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
destination message-size-limit bytes
destination message-size-limit bytes
To configure a maximum destination message size for the destination profile, use the destination
message-size-limit bytes command.
destination message-size-limit bytes
Syntax Description This command has no arguments or keywords.
Defaults 3145728 bytes
Command Modes cfg-call-home-profile
Command History
Usage Guidelines To enter profile call-home configuration submode, use the profile command in call-home configuration
mode.
Examples This example shows how to configure the maximum message size for the destination profile as 3000000:
Switch(config)# call-home
Switch(cfg-call-home)# profile cisco
Switch(cfg-call-home-profile)# destination message-size-limit 3000000
Switch(cfg-call-home-profile)#
Related Commands
Release Modification
12.2(52)SG Support was introduced on the Catalyst 4500 series switch.
Command Description
destination address Configures the destination e-mail address or URL to which
Call Home messages will be sent.
destination preferred-msg-format Configures a preferred message format.
destination transport-method Enables the message transport method.
profile Enters profile call-home configuration submode
subscribe-to-alert-group all Subscribes to all available alert groups.
subscribe-to-alert-group configuration Subscribes this destination profile to the Configuration
alert group.
subscribe-to-alert-group diagnostic Subscribes this destination profile to the Diagnostic alert
group.
subscribe-to-alert-group environment Subscribes this destination profile to the Environment alert
group.