Cisco Catalyst 4500 Series Command Reference Guide

2-116
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear ip wccp
clear ip wccp
To remove Web Cache Communication Protocol (WCCP) statistics (counts) maintained on the switch
for a particular service, use the clear ip wccp command in privileged EXEC mode.
clear ip wccp [vrf vrf-name {web-cache | service-number}] [web-cache | service-number]
Syntax Description
Defaults No default behavior or values.
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines Use the show ip wccp and show ip wccp detail commands to display WCCP statistics.
Use the clear ip wccp command to clear the WCCP counters for all WCCP services in all VRFs.
Examples The following example shows how to clear all statistics associated with the web cache service:
Switch# clear ip wccp web-cache
Related Commands
web-cache (Optional) Directs the router to remove statistics for the web cache
service.
service-number (Optional) Number of the cache service to be removed. The number
can be from 0 to 99.
Release Modification
15.0(2)SG This command was introduced on Supervisor Engine 6-E, Supervisor
Engine 6L-E, Catalyst 4900M, and Catalyst 4948E.
Command Description
ip wccp Enables support of the specified WCCP service for participation in a service
group.
show ip wccp Displays global statistics related to the WCCP.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E