Cisco Catalyst 4500 Series - Show Vslp (Virtual Switch)

2-965
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show vslp (virtual switch)
show vslp (virtual switch)
To display Virtual Switch Link Protocol (VSLP) instance information, use the show vslp command in
EXEC mode.
show vslp {lmp | rrp [type]} | {instances | lmp [type] | packet [counters] | rrp [type]}
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History
Usage Guidelines The valid values for the type argument are as follows:
• counters—Displays counter information.
• detail—Displays detailed information.
• fsm—Displays Finite State Machine (FSM) information.
• neighbors—Displays neighbor information (supported with the lmp keyword only).
• status—Displays status information.
• summary—Displays a summary of information.
• timer—Displays Tx and Rx hello timer values.
The timers already displayed in the show vslp lmp timers output are shown in the output of the show vslp
lmp summary command.
The output of the show vslp rrp detail command includes the information from the following
commands:
• show vslp rrp summary
• show vslp rrp counters
• show vslp rrp fsm
lmp Specifies the Link Maintenance Protocol (LMP) information.
rrp Specifies the Role Resolution Protocol (RRP) information.
type Specifies the type of information; see the "Usage Guidelines" section for valid values.
instances Displays the VSLP instance mappings.
packet Displays the VSLP packet information.
counters (Optional) Displays the VSLP packet counter information.
Release Modification
Cisco IOS XE 3.4.0SG and
15.1(2)SG
Support for this command was introduced on the Catalyst 4500 series
switch.