2-488
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
netflow-lite exporter
Switch(config-netflow-lite-exporter)# export-protocol netflow-v9
Switch(config-netflow-lite-exporter)# exit
Switch(config)#
Display the exporter
Switch# show netflow-lite exporter exporter1
Netflow-lite Exporter exporter1:
Network Protocol Configuration:
Destination IP address: 5.5.5.6
Source IP Address: 5.5.5.5
VRF label:
DSCP: 0x20
TTL: 128
COS: 7
Transport Protocol Configuration:
Transport Protocol: UDP
Destination Port: 8188
Source Port: 61670
Export Protocol Configuration:
Export Protocol: netflow-v9
Template data timeout: 60
Options sampler-table timeout: 1800
Options interface-table timeout: 1800
Exporter Statistics:
Packets Exported: 0
You can verify your settings with the show netflow-lite exporter privileged EXEC command.
Related Commands Command Description
export-protocol (netflow-lite
exporter submode)
Specifies the export protocol for the NetFlow-lite collector.
netflow-lite exporter Defines an exporter and to enter NetFlow-lite exporter submode.
destination (netflow-lite
exporter submode)
Specifies a destination address in netflow-lite submode.
source (netflow-lite exporter
submode)
Specifies a source Layer 3 interface of the NetFlow-lite collector.
transport udp (netflow-lite
exporter submode)
Specifies a UDP transport destination port for a NetFlow-lite
collector.
ttl (netflow-lite exporter
submode)
Specifies a ttl value for the NetFlow-lite collector.
cos (netflow-lite exporter
submode)
Specifies a cos value for the NetFlow-lite collector.
dscp (netflow-lite exporter
submode)
Specifies a cos value for the NetFlow-lite collector.
template data timeout
(netflow-lite exporter submode)
Specifies a template data timeout for the NetFlow-lite collector.
options timeout (netflow-lite
exporter submode)
Specifies an options timeout for the NetFlow-lite collector.
To Next Page
Loading...
