Cisco Catalyst 4500 Series - Debug Backup

2-141
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug backup
debug backup
To debug the backup events, use the debug backup command. To disable the debugging output, use the
no form of this command.
debug backup
no debug backup
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History
Examples This example shows how to debug the backup events:
Switch# debug backup
Backup events debugging is on
Switch#
Related Commands
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.
Command Description
undebug backup (same as no
debug backup)
Disables debugging output.