Cisco Catalyst 4500 Series - Show Macro Auto Monitor Device

2-849
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show macro auto monitor device
show macro auto monitor device
To display the devices connected to a switch and their associated properties, use the show macro auto
monitor device user EXEC command.
show macro auto monitor device [detail | filter string | interface interface_id | mac-address
mac_address]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines Use this command to display the devices connected to a switch. Use the show macro auto device
privileged EXEC command to display the configurable parameters for a device.
Examples This example shows how to use the show macro auto monitor device privileged EXEC command with
no optional keywords to view the devices connected to the switch:
Switch# show macro auto monitor device
MAC_Address Port_Id Profile Name
============== ======= ============================
000a.b8c6.1e07 Gi1/0/2 Cisco-Device
001f.9e90.1250 Gi1/0/4 Cisco-AP-Aironet-1130
======================================================
This example shows how to use the show macro auto monitor device privileged EXEC command with
the optional mac-address keyword to view summary information about the connected device with the
specified MAC address:
Switch# show macro auto monitor device mac-address 001f.9e90.1250
MAC_Address Port_Id Profile Name
============== ======= ============================
001f.9e90.1250 Gi1/0/4 Cisco-AP-Aironet-1130
==========================================================
detail Displays detailed device classifier information.
filter string Displays information for devices that match the filter.
interface interface_id Displays information about devices attached to the specified inter-
face.
mac mac_address Displays device information for the specified endpoint.
Release Modification
Release IOS XE 3.3.0
SG (15.1(1)SG)
This command was introduced on the Catalyst 4500 series switch.