EasyManuals Logo

Cisco Catalyst 4500 Series Command Reference Guide

Cisco Catalyst 4500 Series
1230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #620 background imageLoading...
Page #620 background image
2-562
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
pppoe intermediate-agent vendor-tag strip
pppoe intermediate-agent vendor-tag strip
Note This command takes effect only if you enable the pppoe intermediate-agent interface configuration
command and the pppoe intermediate-agent trust command.
To enable vendor-tag stripping on PPPoE Discovery packets from PPPoE Server (or BRAS), use the
pppoe intermediate-agent vendor-tag strip command. To disable this setting, use the no form of this
command.
pppoe intermediate-agent vendor-tag strip
no pppoe intermediate-agent vendor-tag strip
Syntax Description This command has no arguments or keywords.
Defaults vendor-tag stripping is turned off.
Command Modes Interface configuration mode
Command History
Usage Guidelines This command has no effect on untrusted interfaces.
Use this command on a PPPoE Intermediate Agent trusted interface to strip off the vendor-specific tags
in PPPoE Discovery packets that arrive downstream from the PPPoE Server (or BRAS), if any.
Examples This example shows how to set vendor-tag stripping on an interface:
Switch(config-if)# pppoe intermediate-agent vendor-tag strip
This example shows how to disable vendor-tag stripping on an interface:
Switch(config-if)# no pppoe intermediate-agent vendor-tag strip
Related Commands
Release Modification
12.2(50)SG Support for this command was introduced on the Catalyst 4500 series
switch.
Command Description
pppoe intermediate-agent
(interface)
Enables the PPPoE Intermediate Agent feature on an interface.
pppoe intermediate-agent
trust
Sets the trust configuration of an interface.

Table of Contents

Other manuals for Cisco Catalyst 4500 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 4500 Series and is the answer not in the manual?

Cisco Catalyst 4500 Series Specifications

General IconGeneral
SeriesCatalyst 4500 Series
CategorySwitch
Layer SupportLayer 2, Layer 3
Form FactorModular chassis
StackableNo
Chassis Slots3, 6, 7, 10
Power Supply OptionsAC, DC
RedundancyPower supply, Supervisor engine
Network ManagementCisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
FeaturesSecurity, QoS
Port DensityUp to 384 ports per chassis
Security Features802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine8-E

Related product manuals