Cisco Catalyst 4500 Series Command Reference Guide

2-847
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show macro auto monitor clients
show macro auto monitor clients
To display the clients using the device classifier facility on the switch, use the show macro auto monitor
clients user EXEC command.
show macro auto monitor clients
Syntax Description This command has no arguments or keywords.
Command Default User EXEC
Privileged EXEC
Command History
Usage Guidelines Device classifier (DC) is enabled by default when you enable a client application (for example, Auto
Smartports) that uses its functionality. Use the show macro auto monitor clients command to display
the clients that are using the DC feature on the switch.
As long as any clients are using the DC, you cannot disable it by using the no macro auto monitor
command. If you attempt to disable the DC while a client is using it, an error message appears.
Examples This example shows how to use the show macro auto monitor clients privileged EXEC command to
view the clients using the DC on the switch:
Switch# show macro auto monitor clients
Client Name
====================
Auto Smart Ports
This example shows the error message that appears when you attempt to disable DC while a client is
using it:
Switch(config)# no macro auto monitor
These subsystems should be disabled before disabling Device classifier
Auto Smart Ports
% Error - device classifier is not disabled
Related Commands
Release Modification
Release IOS XE 3.3.0
SG (15.1(1)SG)
This command was introduced on the Catalyst 4500 series switch.
Command Description
macro auto device Configures macro default parameter values.
macro auto execute (built-in
function)
Configures mapping from an event trigger to a built-in macro.
macro auto global processing Enables Auto Smartports on a switch.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E