Cisco Catalyst 4500 Series Command Reference Guide

2-845
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show macro auto device
show macro auto device
Use the show macro auto device global configuration command to display the default information for
a device, including builtin function name and the parameters that can be provided for the commands
when executing the builtin function.
show macro auto device device_id
Syntax Description
Defaults None
Command Modes Global configuration
Command History
Usage Guidelines This command displays the default values as well as the currently used values if configured.
Examples This example shows how to display the default information for the device access-point:
Switch# show macro auto device access-point
Device:access-point
Default Macro:CISCO_AP_AUTO_SMARTPORT
Current Macro:CISCO_AP_AUTO_SMARTPORT
Configurable Parameters:NATIVE_VLAN
Defaults Parameters:NATIVE_VLAN=1
Current Parameters:NATIVE_VLAN=1
Related Commands
device_id
Specifies the device ID.
Release Modification
12.2(54)SG This command was introduced on the Catalyst 4500 series switch.
Command Description
show macro auto event
manager
Refer to the Command Reference in the IOS library
show macro auto interface Display Auto SmartPorts status and the functions applied on an
interface.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E