Cisco Catalyst 4500 Series Command Reference Guide

2-240
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
energywise (global configuration)
energywise (global configuration)
Use the energywise global configuration command to enable and configure EnergyWise on an entity.
Use the no form of this command to disable EnergyWise on the entity and remove the EnergyWise
configuration.
energywise {importance importance | keywords word,word,... | level level | management
tcp-port-number | name name | neighbor hostname | ip-address udp-port-number | role role}
no energywise {importance | keywords | level | management | name | neighbor | role}
Syntax Description importance importance Sets the importance of the entity.
The range is from 1 to 100.
keywords word,word,... Assigns at least one keyword for the entity.
When assigning multiple keywords, separate the keywords with commas,
and do not use spaces between keywords.
For the word value:
• You can enter alphanumeric characters and symbols such as #, (, %, ! or
&.
• Do not use an asterisk (*) or a blank space between the characters and
symbols.
level level Sets the power level of the entity.
The only valid value is 10.
management
tcp-port-number
Specifies the TCP port that connects to the management station.
The range is from 1 to 65000.
name name Specifies the EnergyWise-specific entity name.
For the name value:
• You can enter alphanumeric characters and symbols such as #, (, %, ! or
&.
• Do not use an asterisk (*) or a blank space between the characters and
symbols.
neighbor hostname |
ip-address
udp-port-number
Assigns a static neighbor.
• Hostname (hostname) or IP address (ip-address).
• UDP port (udp-port-number) that sends and receives queries. The range
is from 1 to 65000.
role role Specifies the role of the entity in the EnergyWise domain. For example,
lobby.b20.
For the role value:
• You can enter alphanumeric characters and symbols such as #, (, %, ! or
&.
• Do not use an asterisk (*) or a blank space between the characters and
symbols.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E