Cisco Catalyst 4500 Series Command Reference Guide

2-121
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear netflow-lite exporter statistics
clear netflow-lite exporter statistics
Note NetFlow-lite is only supported on the Catalyst 4948E and Catalyst 4948E-F Ethernet switches.
To clear the collector statistics, use the clear netflow-lite exporter statistics command.
clear netflow-lite exporter exporter-name statistics
Syntax Description
Defaults None
Command Modes Privileged EXEC mode
Command History
Examples The following examples show how to clear statistics of a packet sampler at a monitor:
Switch# clear netflow-lite exporter e1 statistics
Related Commands
exporter-name Specifies an exporter.
Release Modification
15.0(2)SG Command introduced on on the Catalyst 4948E and Catalyst 4948E-F
Ethernet switches.
Command Description
clear netflow-lite monitor
statistics interface
Clears statistics of a packet sampler at a monitor.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E