Cisco Catalyst 4500 Series Command Reference Guide

2-123
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear nmsp statistics
clear nmsp statistics
To clear the Network Mobility Services Protocol (NMSP) statistics, use the clear nmsp statistics
command. This command is available only when your switch is running the cryptographic (encrypted)
software image.
clear nmsp statistics
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC mode
Command History
Examples This example shows how to clear NMSP statistics:
Switch# clear nmsp statistics
Switch#
You can verify that information was deleted by entering the show nmsp statistics command.
Related Commands
Release Modification
12.2(52)SG Support for this command was introduced on the Catalyst 4500 series switch.
Command Description
show nmsp Displays the NMSP information.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E