Cisco Catalyst 4500 Series - Clear Ip Arp Inspection Log; This Command Has no Arguments or Keywords

2-105
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear ip arp inspection log
clear ip arp inspection log
To clear the status of the log buffer, use the clear ip arp inspection log command.
clear ip arp inspection log
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History
Examples This example shows how to clear the contents of the log buffer:
Switch# clear ip arp inspection log
Switch#
Related Commands
Release Modification
12.1(19)EW Support for this command was introduced on the Catalyst 4500 series switch.
Command Description
arp access-list Defines an ARP access list or adds clauses at the end of a
predefined list.
show ip arp inspection log Displays the status of the log buffer.