Cisco Catalyst 4500 Series Command Reference Guide

2-851
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show macro auto monitor type
show macro auto monitor type
To display all the device types recognized by the device classifier, use the show macro auto monitor
type user EXEC command.
show macro auto monitor type [table [built-in | default] | string filter_string]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines This command displays all the device types recognized by the device classification engine. The number
of available device types is the number of profiles stored on the switch. Because the number of profiles
can be very large, you can use the filter keyword to limit the command output.
Examples This example shows how to use the show macro auto monitor type privileged EXEC command with
no optional keywords to view the devices recognized by the device classifier:
Switch# show macro auto monitor type table
Valid Type Profile Name min Conf ID
=========== ========= ================== ======== ====
Valid Default Apple-Device 10 0
Valid Default Aruba-Device 10 1
Valid Default Avaya-Device 10 2
Valid Default Avaya-IP-Phone 20 3
Valid Default BlackBerry 20 4
Valid Default Cisco-Device 10 5
Valid Default Cisco-IP-Phone 20 6
Valid Default Cisco-IP-Phone-7902 70 7
Valid Default Cisco-IP-Phone-7905 70 8
Valid Default Cisco-IP-Phone-7906 70 9
Valid Default Cisco-IP-Phone-7910 70 10
Valid Default Cisco-IP-Phone-7911 70 11
Valid Default Cisco-IP-Phone-7912 70 12
Valid Default Cisco-IP-Phone-7940 70 13
Valid Default Cisco-IP-Phone-7941 70 14
Valid Default Cisco-IP-Phone-7942 70 15
table Displays device classification in a table.
built-in Displays device classification information from the built-in device
table.
default Displays device classification information from the default device
table.
filter string Displays information for devices that match the filter.
Release Modification
Release IOS XE 3.3.0
SG (15.1(1)SG)
This command was introduced on the Catalyst 4500 series switch.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E