Cisco Catalyst 4500 Series Command Reference Guide

2-110
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear ip dhcp snooping database statistics
clear ip dhcp snooping database statistics
To clear the DHCP binding database statistics, use the clear ip dhcp snooping database statistics
command.
clear ip dhcp snooping database statistics
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History
Examples This example shows how to clear the DHCP binding database:
Switch# clear ip dhcp snooping database statistics
Switch#
Related Commands
Release Modification
12.1(19)EW Support for this command was introduced on the Catalyst 4500 series switch.
Command Description
ip dhcp snooping Globally enables DHCP snooping.
ip dhcp snooping binding Sets up and generates a DHCP binding configuration to
restore bindings across reboots.
ip dhcp snooping information option Enables DHCP option 82 data insertion.
ip dhcp snooping trust Enables DHCP snooping on a trusted VLAN.
ip dhcp snooping vlan Enables DHCP snooping on a VLAN or a group of VLANs.
show ip dhcp snooping Displays the DHCP snooping configuration.
show ip dhcp snooping binding Displays the DHCP snooping binding entries.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E