EasyManuals Logo

Cisco Catalyst 4500 Series Command Reference Guide

Cisco Catalyst 4500 Series
1230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #102 background imageLoading...
Page #102 background image
2-44
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
auto qos classify
auto qos classify
To generate a QoS configuration for an untrusted interface, use the auto qos classify interface command.
auto qos classify
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Interface configuration mode
Command History
Usage Guidelines This command generates a QoS configuration for untrusted interfaces. It places a service-policy to
classify the traffic coming from untrusted desktops or devices and marks them accordingly. The
service-policies generated do not police.
Global Level Commands Generated
The global templates are defined in A, B, C.
A. Template for ACLs and application classes used by the auto qos classify command.
ip access-list extended AutoQos-4.0-ACL-Multimedia-Conf
permit udp any any range 16384 32767
ip access-list extended AutoQos-4.0-ACL-Signaling
permit tcp any any range 2000 2002
permit tcp any any range 5060 5061
permit udp any any range 5060 5061
ip access-list extended AutoQos-4.0-ACL-Transactional-Data
permit tcp any any eq 443
permit tcp any any eq 1521
permit udp any any eq 1521
permit tcp any any eq 1526
permit udp any any eq 1526
permit tcp any any eq 1575
permit udp any any eq 1575
permit tcp any any eq 1630
permit udp any any eq 1630
ip access-list extended AutoQos-4.0-ACL-Bulk-Data
permit tcp any any eq ftp
permit tcp any any eq ftp-data
permit tcp any any eq 22
permit tcp any any eq smtp
permit tcp any any eq 465
permit tcp any any eq 143
permit tcp any any eq 993
permit tcp any any eq pop3
Release Modification
15.1(1)SG,
15.1(1)SG IOS-XE 3.3.0
Support for this command was introduced on the Catalyst 4500 series
switch.

Table of Contents

Other manuals for Cisco Catalyst 4500 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 4500 Series and is the answer not in the manual?

Cisco Catalyst 4500 Series Specifications

General IconGeneral
SeriesCatalyst 4500 Series
CategorySwitch
Layer SupportLayer 2, Layer 3
Form FactorModular chassis
StackableNo
Chassis Slots3, 6, 7, 10
Power Supply OptionsAC, DC
RedundancyPower supply, Supervisor engine
Network ManagementCisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
FeaturesSecurity, QoS
Port DensityUp to 384 ports per chassis
Security Features802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine8-E

Related product manuals