Cisco Catalyst 4500 Series Command Reference Guide

2-447
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
macro auto sticky
macro auto sticky
Use the macro auto sticky configuration to specify not to remove configurations applied by ASP across
link flaps and device removal.
macro auto sticky
Syntax Description
Defaults Not sticky (macros are removed
Command Modes Global configuration
Command History
Usage Guidelines This command enables you to avoid unnecessary removal of ASP configurations when a feature
intentionally shuts down a link (like EnergyWise, which shuts down inactive links to save energy). When
such a feature is enabled, you don't want ASP macros to be applied and removed unnecessarily. So you
configure the sticky feature.
Examples This example shows how to specify not to remove configurations:
Switch(config)# macro auto sticky
Related Commands
This command has no arguments or keywords.
Release Modification
12.2(54)SG This command was introduced on the Catalyst 4500 series switch.
Command Description
macro auto execute (built-in
function)
Changes built-in function default values or to map user-defined
triggers to built-in functions, and to pass the parameter values.
macro auto execute
(remotely-defined trigger)
Maps a trigger to a remotely defined functions.
macro auto execute
(user-defined function)
Maps a trigger to a user-defined function.
macro auto global processing Enables Auto Smartports on a switch.
macro auto processing Enables Auto SmartPorts macros on a specific interface.
shell trigger Creates a user defined trigger.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E