Cisco Catalyst 4500 Series Command Reference Guide

2-561
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
pppoe intermediate-agent trust
pppoe intermediate-agent trust
To set the trust configuration of an interface, use the pppoe intermediate-agent trust global command.
To unset the trust parameter, use the no form of this command.
pppoe intermediate-agent trust
no pppoe intermediate-agent trust
Syntax Description This command has no arguments or keywords.
Defaults All interfaces are untrusted.
Command Modes Interface configuration mode
Command History
Usage Guidelines At least one trusted interface must be present on the switch for PPPoE Intermediate Agent feature to
work.
Set the interface connecting the switch to the PPPoE Server (or BRAS) as trusted.
Examples This example shows how to set an interface as trusted:
Switch(config-if)# pppoe intermediate-agent trust
This example shows how to disable the trust configuration for an interface:
Switch(config-if)# no pppoe intermediate-agent trust
Related Commands
Release Modification
12.2(50)SG Support for this command was introduced on the Catalyst 4500 series
switch.
Command Description
pppoe intermediate-agent
vendor-tag strip
Enables vendor-tag stripping on PPPoE Discovery packets from a
PPPoE Server (or BRAS).

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E