Cisco Catalyst 4500 Series Command Reference Guide

2-846
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show macro auto interface
show macro auto interface
Use the show macro auto interface command to display Auto SmartPorts status and the functions
applied on an interface.
show macro auto interface interface_id
Syntax Description
Defaults None
Command Modes Global configuration
Command History
Examples This example shows how to display Auto SmartPorts status and the applied macros:
Switch# show macro auto int gi3/8
Global Auto Smart Port Status
Auto Smart Ports Enabled
Fallback : CDP Disabled, LLDP Disabled
Interface Auto Smart Port Fallback Macro Description(s)
--------------------------------------------------------------
Gi3/8 TRUE None CISCO_PHONE_EVENT
Related Commands
interface_id Specifies an interface ID.
Release Modification
12.2(54)SG This command was introduced on the Catalyst 4500 series switch.
Command Description
show macro auto device Displays the default information for a device, including builtin
function name and the parameters that can be provided for the
commands when executing the builtin function.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E