Cisco Catalyst 4500 Series Command Reference Guide

2-1134
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
vtp password
vtp password
To create a VTP domain password, use the vtp password command. To delete the password, use the no
form of this command.
vtp password password-value
no vtp password
Syntax Description
Defaults Disabled
Command Modes VLAN configuration mode
Command History
Examples This example shows how to create a VTP domain password:
Switch(vlan-config)# vtp password DomainChandon
Switch(vlan-config)#
This example shows how to delete the VTP domain password:
Switch(vlan-config)# no vtp password
Clearing device VLAN database password.
Switch(vlan-config)#
Related Commands
password-value An ASCII string, from 1 to 32 characters, identifying the administrative domain for
the device.
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.
Command Description
show vtp Displays VTP statistics and domain information.
vtp (global configuration
mode)
Configures the name of a VTP configuration storage file.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E