Cisco Catalyst 4500 Series Command Reference Guide

2-899
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show power inline police
show power inline police
To display PoE policing and monitoring status, use the show power inline police command.
show power inline police
[interfacename] [module n]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History
Usage Guidelines The Oper Power field displays the true power consumption of the connected device.
The show power inline police command with no keywords displays PoE policing status for all interfaces
in the chassis.
If this command is executed at the global level, the last line of the output under Oper Power field displays
the total true inline power consumption of all devices connected to the switch.
Examples This example shows how to display PoE policing status for a interface GigabitEthernet 2/1:
Switch# show power inline police gigabitEthernet 2/1
Available:421(w) Used:44(w) Remaining:377(w)
Interface Admin Oper Admin Oper Cutoff Oper
State State Police Police Power Power
--------- ------ ---------- ---------- ---------- ------ -----
Gi2/1 auto on errdisable ok 22.6 9.6
Related Commands
interfacename (optional) Displays PoE policing and monitoring status for a particular interface.
module n (optional) Display PoE policing and monitoring status for all interfaces on this
module.
Release Modification
12.2(50)SG Support for this command was introduced on the Catalyst 4500 series
switch.
Command Description
power inline police Configures PoE policing on a particular interface.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E