Cisco Catalyst 4500 Series Command Reference Guide

2-158
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug monitor
debug monitor
To display the monitoring activity, use the debug monitor command. To disable the debugging output,
use the no form of this command.
debug monitor {all | errors | idb-update | list | notifications | platform | requests}
no debug monitor {all | errors | idb-update | list | notifications | platform | requests}
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History
Examples This example shows how to debug the monitoring errors:
Switch# debug monitor errors
SPAN error detail debugging is on
Switch#
Related Commands
all Displays all the SPAN debugging messages.
errors Displays the SPAN error details.
idb-update Displays the SPAN IDB update traces.
list Displays the SPAN list tracing and the VLAN list tracing.
notifications Displays the SPAN notifications.
platform Displays the SPAN platform tracing.
requests Displays the SPAN requests.
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.
Command Description
undebug monitor (same as no debug
monitor)
Disables debugging output.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E