Cisco Catalyst 4500 Series - Reset

2-607
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
reset
reset
To leave the proposed new VLAN database but remain in VLAN configuration mode and reset the
proposed new database to be identical to the VLAN database currently implemented, use the reset
command.
reset
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes VLAN configuration mode
Command History
Examples This example shows how to reset the proposed new VLAN database to the current VLAN database:
Switch(vlan-config)# reset
RESET completed.
Switch(vlan-config)#
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.