Cisco Catalyst 4500 Series Command Reference Guide

2-955
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show vlan group
show vlan group
To display the VLANs mapped to VLAN groups, use the show vlan group privildeged EXEC command.
show vlan group [group-name group-name]
Syntax Description
Defaults None
Command Modes Privileged EXEC
Command History
Usage Guidelines The show vlan group command displays the existing VLAN groups and lists the VLANs and VLAN
ranges that are members of each VLAN group. If you use the group-name keyword, you display only
the members of the VLAN group specified by the group-name argument.
Examples This example shows how to display the members of a specified VLAN group:
Switch# show vlan group group-name ganymede
Group Name Vlans Mapped
---------------- -------------------
ganymede 7-9
Related Commands
group-name
group-name
(Optional) Displays the VLANs mapped to the specified VLAN group.
Release Modification
12.2(54)SG This command was modified to support user distribution on the Catalyst 4500 series
switch.
Command Description
vlan group Creates or modifies a VLAN group.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E