Cisco Catalyst 4500 Series - Debug Port-Security

2-165
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug port-security
debug port-security
To debug port security, use the debug port-security command. To disable the debugging output, use the
no form of this command.
debug port-security
no debug port-security
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History
Examples This example shows how to enable all PM debugging:
Switch# debug port-security
Switch#
Related Commands
Release Modification
12.1(13)EW Support for this command was introduced on the Catalyst 4500 series switch.
Command Description
switchport port-security Enables port security on an interface.