Cisco Catalyst 4500 Series Command Reference Guide

2-117
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear lacp counters
clear lacp counters
To clear the statistics for all the interfaces belonging to a specific channel group, use the clear lacp
counters command.
clear lacp [channel-group] counters
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History
Usage Guidelines If you do not specify a channel group, all channel groups are cleared.
If you enter this command for a channel group that contains members in PAgP mode, the command is
ignored.
Examples This example shows how to clear the statistics for a specific group:
Switch# clear lacp 1 counters
Switch#
Related Commands
channel-group (Optional) Channel-group number; valid values are from 1 to 64.
Release Modification
12.1(13)EW Support for this command was introduced on the Catalyst 4500 series switch.
Command Description
show lacp Displays LACP information.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E