Cisco Catalyst 4500 Series Command Reference Guide

2-1115
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
vlan database
vlan database
To enter VLAN configuration mode, use the vlan database command.
vlan database
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History
Usage Guidelines From VLAN configuration mode, you can access the VLAN database editing buffer manipulation
commands, including:
• abort—Exits mode without applying the changes.
• apply—Applies the current changes and bumps the revision number.
• exit—Applies the changes, bumps the revision number, and exits VLAN configuration mode.
• no—Negates a command or sets its defaults; valid values are vlan and vtp.
• reset—Abandons the current changes and rereads the current database.
• show—Displays the database information.
• vlan—Accesses the subcommands to add, delete, or modify values that are associated with a single
VLAN. For information about the vlan subcommands, see the vlan (VLAN Database mode)
command.
• vtp—Accesses the subcommands to perform VTP administrative functions. For information about
the vtp subcommands, see the vtp client command.
Examples This example shows how to enter VLAN configuration mode:
Switch# vlan database
Switch(vlan)#
This example shows how to exit VLAN configuration mode without applying changes after you are in
VLAN configuration mode:
Switch(vlan)# abort
Aborting....
Switch#
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E