2-953
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show vlan counters
show vlan counters
To display the software-cached counter values, use the show vlan counters command.
show vlan [id vlanid] counters
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History
Usage Guidelines If you enter the show vlan counters command without specifying the VLAN ID, the software-cached
counter values for all VLANs are displayed.
Examples This example shows how to display the software-cached counter values for a specific VLAN:
Switch# show vlan counters
* Multicast counters include broadcast packets
Vlan Id : 1
L2 Unicast Packets : 0
L2 Unicast Octets : 0
L3 Input Unicast Packets : 0
L3 Input Unicast Octets : 0
L3 Output Unicast Packets : 0
L3 Output Unicast Octets : 0
L3 Output Multicast Packets : 0
L3 Output Multicast Octets : 0
L3 Input Multicast Packets : 0
L3 Input Multicast Octets : 0
L2 Multicast Packets : 1
L2 Multicast Octets : 94
Switch>
Related Commands
id vlanid (Optional) Displays the software-cached counter values for a specific VLAN.
Release Modification
12.1(13)EW Support for this command was introduced on the Catalyst 4500 Series Switches.
Command Description
clear vlan counters Clears the software-cached counter values to start from
zero again for a specified VLAN or all existing VLANs.
To Next Page
Loading...
Need help?
General
