Cisco Catalyst 4500 Series Command Reference Guide

2-864
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show netflow-lite exporter
show netflow-lite exporter
Note NetFlow-lite is only supported on the Catalyst 4948E and Catalyst 4948E-F Ethernet switches.
To displays information about the collector and global stats, use the show netflow-lite exporter
command.
show netflow-lite exporter exporter-name
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History
Usage Guidelines This command displays the total number of export packets sent.
Examples This example shows how to display information about the collector and global stats:
Switch# show netflow-lite exporter e1
Netflow-lite Exporter e1:
Description: Exporter
Network Protocol Configuration:
Destination IP address: 192.168.1.1
VRF label: cisc
Source IP Address: 10.1.1.5
DSCP: 0x1
TTL: 30
COS: 1
Transport Protocol Configuration:
Transport Protocol: UDP
Destination Port: 1234
Source Port: 65535
Export Protocol Configuration:
Export Protocol: netflow-v9
Exporter Statistics:
Export packets sent: 36
exporter-name Specifies an exporter name.
Release Modification
15.0(2)SG Command introduced on the Catalyst 4500 series switch.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E