Cisco Catalyst 4500 Series Command Reference Guide

2-865
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show netflow-lite exporter
Related Commands Command Description
cos (netflow-lite exporter
submode)
Specifies a cos value for the NetFlow-lite collector.
source (netflow-lite exporter
submode)
Specifies a source Layer 3 interface of the NetFlow-lite collector.
transport udp (netflow-lite
exporter submode)
Specifies a UDP transport destination port for a NetFlow-lite
collector.
ttl (netflow-lite exporter
submode)
Specifies a ttl value for the NetFlow-lite collector.
dscp (netflow-lite exporter
submode)
Specifies a cos value for the NetFlow-lite collector.
template data timeout
(netflow-lite exporter submode)
Specifies a template data timeout for the NetFlow-lite collector.
options timeout (netflow-lite
exporter submode)
Specifies an options timeout for the NetFlow-lite collector.
export-protocol (netflow-lite
exporter submode)
Specifies the export protocol for the NetFlow-lite collector.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E