Cisco Catalyst 4500 Series - Clear Ip Access-Template

2-104
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear ip access-template
clear ip access-template
To clear the statistical information in access lists, use the clear ip access-template command.
clear ip access-template access-list
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History
Examples This example shows how to clear the statistical information for an access list:
Switch# clear ip access-template 201
Switch#
access-list Number of the access list; valid values are from 100 to 199 for an IP extended access
list, and from 2000 to 2699 for an expanded range IP extended access list.
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.