Cisco Catalyst 4500 Series Command Reference Guide

2-101
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear hw-module slot password
clear hw-module slot password
To clear the password on an intelligent line module, use the clear hw-module slot password command.
clear hw-module slot slot_num password
Syntax Description
Defaults The password is not cleared.
Command Modes Privileged EXEC mode
Command History
Usage Guidelines You only need to change the password once unless the password is reset.
Examples This example shows how to clear the password from slot 5 on a line module:
Switch# clear hw-module slot 5 password
Switch#
Related Commands
slot_num Slot on a line module.
Release Modification
12.2(18)EW Support for this command was introduced on the Catalyst 4500 series switch.
Command Description
hw-module power Turns the power off on a slot or line module.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E