Cisco Catalyst 4500 Series Command Reference Guide

2-918
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show shell functions
show shell functions
Use the show shell functions command to display configurations for all builtin shell functions.
show shell functions
Syntax Description
Defaults None
Command Modes Priviledged EXEC
Command History
Usage Guidelines This command only displays the contents of builtin shell functions. To display the contents of user
created functions, use the show shell triggers command.
Examples This example illustrates how to display configurations included for all the shell functions:
Switch# show shell functions
Related Commands
No keywords
Release Modification
12.2(54)SG This command was introduced on the Catalyst 4500 series switch.
Command Description
shell trigger Creates a user defined trigger.
show shell triggers Configures a user defined trigger.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E