Cisco Catalyst 4500 Series Command Reference Guide

2-919
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show shell triggers
show shell triggers
Use the show shell triggers command to display detail for all supported builtin and user created triggers.
show shell triggers
Syntax Description
Defaults None
Command Modes Privileged EXEC
Command History
Usage Guidelines This command displays builtin triggers and user defined triggers (with their mapped functions).
Examples This example illustrates how to display detail for all supported triggers:
Switch# show shell triggers
Trigger Id: testGroup
Trigger description: testGroup
Trigger environment:
Trigger mapping function:
Related Commands
No keywords
Release Modification
12.2(54)SG This command was introduced on the Catalyst 4500 series switch.
Command Description
shell trigger Creates a user defined trigger.
show shell functions Displays configurations included for all the builtin functions
including user created and built-in functions.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E