Cisco Catalyst 4500 Series - Clear Energywise Neighbors

2-99
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear energywise neighbors
clear energywise neighbors
Use the clear energywise neighbors privileged EXEC command to delete the EnergyWise neighbor
tables.
clear energywise neighbors
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This example shows how to delete the neighbor tables:
Switch# clear energywise neighbors
Cleared all non static energywise neighbors
You can verify that the tables were deleted by entering the show energywise neighbors privileged EXEC
command.
Note The clear energywise neighbors command clears all discovered neighbors.
Related Commands
Release Modification
12.2(52)SG This command was introduced on the Catalyst 4500 series switch.
Command Description
show energywise Displays the EnergyWise settings and status of the entity and
PoE ports.