Cisco Catalyst 4500 Series Command Reference Guide

2-637
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
shell trigger
shell trigger
Use the shell trigger global configuration command to create a user defined trigger. Use the no form of
this command to delete the trigger.
shell trigger identifier description
no shell trigger identifier description
Syntax Description
Defaults There are system-defined event triggers:
• CISCO_PHONE_EVENT
• CISCO_SWITCH_EVENT
• CISCO_ROUTER_EVENT
• CISCO_WIRELESS_AP_EVENT
• CISCO_WIRELESS_LIGHTWEIGHT_AP_EVENT
• DMP
• IPVSC
Command Modes Global configuration
Command History
Usage Guidelines Use this command to create user-defined event triggers in conjunction with the macro auto execute
global configuration command.
To support dynamic device discovery when using 802.1X authentication, configure the RADIUS
authentication server to support the Cisco attribute-value (AV) pair: auto-smart-port=event trigger.
This command is mainly used for 802.1X authentication based triggers provided 802.1X or MAB is
supported, enabling you to map new platform strings or device IDs to their respective macros or
functions.
Examples This example shows how to create a user-defined event trigger called RADIUS_MAB_EVENT:
Switch# configure terminal
Switch(config)# shell trigger RADIUS_MAB_EVENT MAC_AuthBypass Event
Switch(config)# end
identifier Specifies the event trigger identifier. The identifier should have no spaces or
hyphens between words.
description Specifies the event trigger description text.
Release Modification
12.2(50)SE This command was introduced on the Catalyst 4500 series switch.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E