Cisco Catalyst 4500 Series - Page 696

2-638
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
shell trigger
Related Commands Command Description
macro auto global processing Enables Auto Smartports on a switch.
macro auto processing Enable Auto SmartPorts macros on a specific interface.
show shell Displays information about event triggers and macros.
macro auto device Simplifies changing the parameters for a built-in functions for a
device type.
macro auto execute (builtin
function)
Changes built-in function default values or to map user-defined
triggers to built-in functions, and to pass the parameter values.
macro auto execute
(user-defined function)
Maps a trigger to a user-defined function.
macro auto execute
(remotely-defined function)
Maps a trigger to a remotely defined functions.
macro auto processing Enables Auto SmartPorts macros on a specific interface.
macro auto sticky Specifies not to remove configurations applied by ASP across link
flaps and device removal.